收藏本站
R1EX25512ASA00A/R1EX25512ATA00A
Write Status Register (WRSR):
The Write Status Register (WRSR) instruction allows new values to be written to the Status Register. Before it can be
accepted, a Write Enable (WREN) instruction must previously have been executed. After the Write Enable (WREN)
instruction has been decoded and executed, the device sets the Write Enable Latch (WEL). The instruction sequence is
shown in the following figure. The Write Status Register (WRSR) instruction has no effect on b6, b5, b4, b1 and b0 of
the Status Register. b6, b5 and b4 are always read as 0. Chip select ( S ) must be driven high after the rising edge of
serial clock (C) that latches in the eighth bit of the data byte, and before the next rising edge of serial clock (C).
Otherwise, the Write Status Register (WRSR) instruction is not executed. As soon as chip select ( S ) is driven high, the
self-timed Write Status Register cycle (whose duration is t W ) is initiated. While the Write Status Register cycle is in
progress, the Status Register may still be read to check the value of the Write In Progress (WIP) bit. The Write In
Progress (WIP) bit is 1 during the self-timed Write Status Register cycle, and is 0 when it is completed. When the cycle
is completed, Write Enable Latch (WEL) is reset. The Write Status Register (WRSR) instruction allows the user to
change the values of the Block Protect (BP1, BP0) bits, to define the size of the area that is to be treated as read-only, as
defined in the Status Register Format table.
The Write Status Register (WRSR) instruction also allows the user to set or reset the Status Register Write Disable
(SRWD) bit in accordance with the write protect ( W ) signal. The Status Register Write Disable (SRWD) bit and write
protect ( W ) signal allows the device to be put in the Hardware Protected Mode (HPM). The Write Status Register
(WRSR) instruction is not executed once the Hardware Protected Mode (HPM) is entered.
The contents of the Status Register Write Disable (SRWD) and Block Protect (BP1, BP0) bits are frozen at their current
values just before the start of the execution of the Write Status Register (WRSR) instruction. The new, updated values
take effect at the moment of completion of the execution of Write Status Register (WRSR) instruction.
Write Status Register (WRSR) Sequence
S
W
V IH
V IL
V IH
V IL
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14
15
C
V IH
V IL
Status Register In
D
V IH
V IL
7
MSB
6
5
4
3
2
1
0
Q
R10DS0046EJ0200 Rev.2.00
Oct.04, 2010
High-Z
Page 13 of 20
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
RA1P011FP1 CONN PLUG 11POS STRAIGHT GOLD
RACD03-700 LED DRIVER 3W 10-43V OUT SGL
RACD06-700 LED DRIVER 6W 3-8.5V OUT LED DR
RACD12-500 LED DRIVER 0.5AOUT 3-24VDC OUT
RACD20-350D LED DRIVER 230VAC 2X(3-34)V OUT
RACD20-700 LED DRIVER 0.7AOUT 100-240VAC
RACD30-500 LED DRIVER 30W 10-56V OUT SGL
RACD60-1400/IP67 LED DRIVER 1.4AOUT 21-28VOUT
相关代理商/技术参数
R1EX25512ATA00A#U0 制造商:Renesas Electronics Corporation 功能描述:512K,64K*8BIT,SERIAL PERIPHERA 制造商:Renesas Electronics Corporation 功能描述:512K,64K*8BIT,SERIAL PERIPHERAL I/F,TSSO - Trays
R1EX25512ATA00I 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 512K EEPROM (64-Kword × 8-bit)
R1F55B32T2M4576 制造商:CTS Corporation 功能描述:SMT CRYSTAL 2.4576MHZ - Bulk
R1G120-AD11-02 功能描述:鼓风机 Size=120 mm CFM=147 VDC=48 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB
R1G120-AD13-02 功能描述:鼓风机 Size=120 mm CFM=147 VDC=24 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB
R1G120-AD13-02-ROHS 制造商:ebm-papst Inc 功能描述:DC Motorized Impeller Ball Bearing 24V 1.2A 26W 4060RPM 147.14CFM 62dB Flange Mount
R1G120-AD13-20-ROHS 制造商:ebm-papst Inc 功能描述:
R1G120-AD17-11 功能描述:鼓风机 DC BACKWARD-CURVED MOTORIZED IMPELLER RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB